Cart is empty
Stereo PA amplifier with integrated limiter and SMPS
Low weight and height due to integrated switch-mode power supply
Temperature-controlled fan, particularly quiet during operation
Limiter and speaker switch-on delay
Peak filter at 80 Hz with 6 dB level increase
3 operating modes can be selected (stereo, parallel or bridged)
Selectable input sensitivity
2 level controls
3 LEDs for each channel for activated protective circuit (protect) overload (clip) and signal
2 LEDs for parallel and bridge operation
Complete protection set against short-circuit, overheat, DC voltage and VHF signals
Electronically balanced inputs via XLR mounting jacks, with feed-through output (stereo RCA/6.3 mm jack)
Speaker outputs via lockable Speaker plugs
SMA-1500 and SMA-2000 with additional pairs of screw terminals for 8 ohms bridge operation
Class 2 H circuitry
Robust steel chassis
19" dimensions with 2 units
Power supply:230 V AC, 50 Hz ~
Power consumption:522 W (1/8 power)
Power output sine:
stereo 4 ohms2 x 743 W
stereo 8 ohms2 x 480 W
8 ohms bridged1 x 1500 W
Frequency range:20-20,000 Hz, ¦ 0.5 dB
Damping factor:>150
Distortion factor:0.05 %
Slew rate:>20 V/Ásec
S/N ratio:>90 dB
Channel seperation:>70 dB/ 1 kHz
Input sensitivity:26 dB/32 dB (3.1 V/1.55 V), switchable
Voltage gain:26 dB/32 dB
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:stereo XLR
Output connectors:stereo Speaker, 2 pairs of screw terminals, feed-through output (stereo RCA, stereo 6.3 mm jack)
Output impedance:>2 ohms
Circuitry:class 2 H
Control elements:power switch, level control per channel, mode switch (stereo/parallel/bridged), sensitivity selector, peak filter selector
LED indicators:parallel, bridge (globally), protect, clip, signal (per channel)
Protection circuits:short-circuit, overheat, DC voltage, VHF signals, softstart
Construction:steel chassis
Dimensions (DxWxH):390 x 483 x 92 mm (19", 2 U)
Weight:9 kg
Low weight and height due to integrated switch-mode power supply
Temperature-controlled fan, particularly quiet during operation
Limiter and speaker switch-on delay
Peak filter at 80 Hz with 6 dB level increase
3 operating modes can be selected (stereo, parallel or bridged)
Selectable input sensitivity
2 level controls
3 LEDs for each channel for activated protective circuit (protect) overload (clip) and signal
2 LEDs for parallel and bridge operation
Complete protection set against short-circuit, overheat, DC voltage and VHF signals
Electronically balanced inputs via XLR mounting jacks, with feed-through output (stereo RCA/6.3 mm jack)
Speaker outputs via lockable Speaker plugs
SMA-1500 and SMA-2000 with additional pairs of screw terminals for 8 ohms bridge operation
Class 2 H circuitry
Robust steel chassis
19" dimensions with 2 units
Power supply:230 V AC, 50 Hz ~
Power consumption:522 W (1/8 power)
Power output sine:
stereo 4 ohms2 x 743 W
stereo 8 ohms2 x 480 W
8 ohms bridged1 x 1500 W
Frequency range:20-20,000 Hz, ¦ 0.5 dB
Damping factor:>150
Distortion factor:0.05 %
Slew rate:>20 V/Ásec
S/N ratio:>90 dB
Channel seperation:>70 dB/ 1 kHz
Input sensitivity:26 dB/32 dB (3.1 V/1.55 V), switchable
Voltage gain:26 dB/32 dB
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:stereo XLR
Output connectors:stereo Speaker, 2 pairs of screw terminals, feed-through output (stereo RCA, stereo 6.3 mm jack)
Output impedance:>2 ohms
Circuitry:class 2 H
Control elements:power switch, level control per channel, mode switch (stereo/parallel/bridged), sensitivity selector, peak filter selector
LED indicators:parallel, bridge (globally), protect, clip, signal (per channel)
Protection circuits:short-circuit, overheat, DC voltage, VHF signals, softstart
Construction:steel chassis
Dimensions (DxWxH):390 x 483 x 92 mm (19", 2 U)
Weight:9 kg